PET Strap & Machine Compatibility
We work with businesses using many commonly used strapping systems — from high-speed automatic machines to semi-automatic arch systems and manual tools.
Getting the Right Strap for Your Machine
Not all PET strap is interchangeable. Machine type, core size, coil dimensions, strap width, and surface finish all affect whether a strap will perform reliably in your system. We take compatibility seriously — and we take the time to understand your setup before making a recommendation.
Fully Automatic Strapping Systems
Fully automatic strapping machines run at high cycle rates and rely on consistent strap feeding, reliable seal formation, and precise coil geometry. For these systems, we typically supply smooth-finish PET strap with consistent coil dimensions.
We work with businesses using many types of fully automatic strapping systems across warehousing, distribution, and manufacturing applications. Talk to us about your system and we will help identify the right specification.
Recommended finish
Smooth PET strap — for consistent feeding and heat-seal performance
Semi-Automatic Strapping Systems
Semi-automatic arch strapping machines are the most common system in Australian warehouses and distribution centres. They use friction-weld sealing and typically perform well with embossed PET strap, though smooth strap may also be suitable depending on the model.
PACKOR supplies PET strap for semi-automatic systems across a range of widths and thicknesses. We can advise on the right specification once we understand your machine setup.
Recommended finish
Embossed PET strap — for enhanced grip and friction-weld seal performance
Key Factors in Strap-Machine Compatibility
Strap Width
Must match your machine specification. Common widths are 12mm, 16mm, and 19mm.
Strap Thickness
Affects break strength and machine feed. Thicker strap is not always better for every machine.
Surface Finish
Smooth for automatic systems. Embossed for semi-automatic and manual. Incorrect finish can affect sealing.
Core Size
The inner core diameter of the coil must match your machine's dispenser or bracket specification.
Coil Geometry
Coil outer diameter and width affect how the strap feeds. Inconsistent coils cause jams.
Break Strength
Must be appropriate for your load weight. Over-specified strap can cause machine issues; under-specified causes load failure.
Talk to Us About Your Machine Setup
We do not claim to supply strap for every machine on the market. What we do is take the time to understand your setup and help you identify whether our products are a suitable match. If they are not, we will tell you — honestly.
When you contact us, have the following information handy if possible: your machine model (if known), the strap width your machine uses, the core size (inner diameter of the coil), and your current strap specification. With this information, we can give you an accurate recommendation.
Need PET Strap That Works With Your Machine?
Contact us with your machine details and we will help you identify the right specification.
Based in Sunshine, Melbourne • Supplying Australia-Wide • Call 0402 519 618